Deionized Water System NDWS-100 - Water Purification System Labnics Deionized Water System is designed to produce purified water with a 10 L capacity and conductivity below 10 µs/cm. Precise temperature control and a clear display support real time monitoring. The unit incorporates an auto sanitary module and UV technology to support reliable purification. The system operates within a temperature range of 10 °C to 35 °C and a humidity range of 30 % to 85 %. It features a 304 stainless steel water tank and an F type RO membrane filter for water purification. Manufactured for laboratory, medical, and water purification applications requiring high purity water and contaminant removal. https://www.labnics.com/deionized-water-system/ndws-100 #LabEquipment #WaterPurificationSystem #Labnics

Portable Nephelometer NPN-200 - Nephelometer Labnics Portable Nephelometer is designed for turbidity measurement from 0.0 to 5.0 McF with a resolution of 0.01 McF. It supports rapid detection of turbidity and optical density in microbial samples and features a clear display for result interpretation. The unit features a silicon photocell detector, normal and average measurement modes, 1 s detection time. Its compact design supports portable operation. Manufactured for microbial growth monitoring, antibiotic susceptibility testing, bacterial suspension standardization, cell concentration measurement, and culture turbidity analysis. https://www.labnics.com/nephelometer/npn-200 #LabEquipment #Nephelometer #Labnics

Blood Bag Tube Sealer NBTS-100 - Blood Bag Tube Sealer Labnics Blood Bag Tube Sealer is designed for sealing blood, infusion, and urine bags using high-frequency sealing technology. It accommodates tube diameters from 2 to 6 mm and helps prevent blood leakage and hemolysis during processing. The unit features automatic sealing, and a single chip control system with automatic voltage adjustment. A circulating air duct supports continuous operation and temperature control. Manufactured for blood banks, hospitals, and biological applications requiring blood bag sealing workflows, equipped with a long-life electronic tube rated for approximately 1000 hours of operation. https://www.labnics.com/blood-bag-tube-sealer/nbts-100 #LabEquipment #BloodBagTubeSealer #Labnics

Automated Cell Counter NACCR-100 - Cell Counter Labnics Automated Cell Counter is designed for cell counting and viability analysis with compatibility for cell sizes from 8 to 200 µm and viability detection from 0 to 100 %. A user level management system supports data confidentiality, while the compact design and software interface simplify routine operation. The system requires a sample volume of 25 µL and offers a CV value of ≤ 5 %. It uses a 6 slot counting slide, delivers results in 2 seconds, supports multiple export formats, and accommodates various cell types. Manufactured for research, clinical, and biotechnology applications. Supports rapid cell counting, viability assessment, and analysis of diverse cell types. Supplied with a cell counter and USB cable. https://www.labnics.com/automated-cell-counter/naccr-100 #LabEquipment #CellCounter #Labnics

NMR Spectrometer NNMR-100 - Spectrometer Labnics NMR Spectrometer is designed for molecular structure analysis with a magnetic field intensity of 0.50 ± 0.01 T. It provides magnetic field uniformity of ≤ 30 ppm and dual temperature control for stable experimental conditions. An industrial grade control platform supports data processing and analysis. The system features a permanent magnet, adjustable temperature control from 25 °C to 35 °C, high resolution spectra capability, and a wide frequency range. It includes a test tube stand, testing lines, and a BNC adapter assembly. Manufactured for pharmaceutical, chemical, biotechnology, and material science applications. Supports molecular characterization, structural analysis, and magnetic resonance testing workflows. https://www.labnics.com/nmr-spectrometer/nnmr-100 #LabEquipment #Spectrometer #Labnics

High Speed Refrigerated Centrifuge NHRC-100 - Centrifuge Labnics High Speed Refrigerated Centrifuge is designed for sample separation at speeds up to 30000 rpm. It automatically calculates RCF and RPM and offers 10 acceleration and deceleration levels with a maximum capacity of 12 × 5 mL. The unit features a high definition LCD, timer range from 1 s to 99 h 59 min, speed accuracy of ±10 r/min, and a temperature range from -20 °C to 40 °C. Manufactured for laboratory sample processing with programmable presets and multiple safety protections. https://www.labnics.com/high-speed-refrigerated-centrifuge/nhrc-100 #LabEquipment #Centrifuge #Labnics

Direct Mercury Analyzer NDMA-101 - Mercury Analyzer Labnics Mercury Analyzer is designed for mercury detection with a wavelength of 253.65 nm. A low pressure mercury lamp, UV silicon photodetector, and dual optical path absorption cell support stable analysis of solid, liquid, and gaseous samples. The 60 position automatic sampler assists continuous sample processing. The system supports electrothermal analysis without chemical digestion. It offers a detection limit of ≤ 0.0005 ng, maximum sample volumes of 1.5 g for solids and 1.5 mL for liquids, and analysis times of ≤ 2.5 minutes per sample. Manufactured for environmental monitoring, food safety, agriculture, metallurgy, and water treatment applications. Supports mercury determination, contaminant analysis, and trace element testing workflows. https://www.labnics.com/mercury-analyzer/ndma-101 #LabEquipment #MercuryAnalyzer #Labnics

Ultrapure Water Purification System NUWS-110 - Water Purification System Labnics Ultrapure Water Purification System is designed to produce Type I ultrapure water from tap water. The integrated pre treatment, RO, and ultrapure purification system helps remove contaminants and supports applications including HPLC, DNA/RNA preparation, and protein analysis. The system delivers pure water output greater than 10 L/h and ultrapure water output of 1 to 1.5 L/min. It features 18.25 MΩ resistivity at 25 °C, a 0.22 µm membrane, audible water shortage alarm, and a fully automated microcomputer control system. Manufactured for analytical testing and molecular biology workflows. Supports HPLC mobile phase preparation, reagent preparation, and laboratory purification processes using ultra purification cartridges, a softener, and a microfilter. https://www.labnics.com/ultrapure-water-purification-system/nuws-110 #LabEquipment #WaterPurificationSystem #Labnics

Automated Blood Culture System NABS-100 - Blood Culture System Labnics Automated Blood Culture System is designed for microbial growth detection in blood and body fluid samples. Independent bottle sensors and colorimetric technology support continuous monitoring and pathogen detection throughout incubation workflows. The system operates at temperatures from 5 °C to 30 °C with humidity up to 80%. It features a modular expandable design, barcode scanning, remote control capability, bidirectional HIS/LIS interface. Manufactured for clinical microbiology and diagnostic testing applications. Supports microbial detection, sample tracking, incubation monitoring, and pathogen identification for pediatric and adult sample processing. https://www.labnics.com/automated-blood-culture-system/nabs-100 #LabEquipment #BloodCultureSystem #Labnics

Anaerobic Jar System NAJS-103 - Anaerobic Jar System Labnics Anaerobic Jar System is designed to generate an oxygen free environment for cultivating anaerobic, microaerophilic, and capnophilic microorganisms within a sealed jar. It supports repeatable atmosphere creation for clinical and microbiology applications and is suitable for laboratories with low sample throughput. The airtight structure supports controlled microbial cultivation. It features a pumping type system, 5 L capacity, accommodates three stacks of six 90 to 100 mm Petri dishes, and includes a 3/25R Petri dish holder. Manufactured for clinical laboratories, microbiology facilities, and research centers requiring oxygen free cultivation conditions. Supports anaerobic cultivation, microbial research, and routine diagnostic testing. https://www.labnics.com/anaerobic-jar-system/najs-103 #LabEquipment #AnaerobicJarSystem #Labnics

Automatic Hematology Analyzer NAHA-101 - Hematology Analyzer Labnics Hematology Analyzer is designed for blood cell analysis with 20 parameters and 3 histograms. It provides 3-part white blood cell differentiation and supports whole blood and prediluted counting modes. The system processes up to 60 samples per hour for routine hematology workflows. The analyzer uses the electrical resistance method for WBC, RBC, and PLT counting. It requires 20 µL for prediluted samples and 9.8 µL for whole blood analysis. Manufactured for clinical diagnostics and hematology testing applications. Supports rapid blood sample analysis, complete blood count testing, and routine laboratory evaluation. https://www.labnics.com/3-parts-hematology-analyzer/naha-101 #LabEquipment #HematologyAnalyzer #Labnics

Oxygen Bomb Calorimeter NOBC-101 -Calorimeter Labnics Oxygen Bomb Calorimeter is designed for calorific value determination with a heat capacity range from 14000 to 15000 J/K. It supports automated operation from sample loading to result output and features a stainless steel bomb for combustion testing. Internal diagnostics assist performance monitoring and fault detection. The system offers a resolution of 0.001 K, measurement accuracy of 60 J/g, and a temperature measurement range from 10 °C to 35 °C for calorific analysis workflows. Manufactured for energy content analysis and quality control workflows. Used for calorific value testing and operational monitoring in analytical applications. https://www.labnics.com/oxygen-bomb-calorimeter/nobc-101 #LabEquipment #Calorimeter #Labnics