Benchtop Conductivity Meter FM-BCT-A100 - Benchtop Probe Meter Fison Benchtop Conductivity Meter measures conductivity, TDS, salinity, and resistivity across 0.000 μS/cm to 3000 mS/cm for water quality, wastewater, and research testing. Its 7.0-inch high-resolution LCD touchscreen, IP54 dust- and splash-resistant housing, and ±0.5% FS accuracy across all parameters support stable, accurate operation in demanding laboratory and industrial environments. Automatic temperature compensation and multi-point auto-recognition calibration reduce manual adjustment steps and calibration errors across conductivity, TDS, salinity, and resistivity workflows. Manufactured for general to high-volume laboratory and water testing facilities, the benchtop conductivity meter connects via RS-232 or USB with GLP-compliant data storage of up to 1,000 sets per parameter and multi-read modes #LabEquipment #WaterTestingEquipment #Fison http://fison.com/benchtop-conductivity-meter/fm-bct-a100

Flash Point Tester FM-FPT-A100 - Flash Point Measurement Device Fison Flash Point Tester measures closed-cup flash points across a −49.9°C to 400°C range for petroleum, aviation, railway, and electric power fluid testing. Its PT100 platinum resistor temperature sensor, K thermocouple flash fire detection, and high-efficiency heating element maintain measurement resolution to 0.1°C and repeatability of 0.029X across the full test range. Automated electric ignition and onboard atmospheric pressure measurement reduce manual intervention and operator error during closed-cup flash point cycles. Storage of up to 50 time-stamped test records and an excess-temperature alarm further minimise data loss and safety incidents across consecutive testing workflows. Manufactured for medium- to high-volume petroleum refining, aviation fuel handling, and industrial fluid quality laboratories, the closed-cup flash point analyser connects via AC 220V ± 10% lab power infrastructure with onboard record storage and a built-in thermal-sensitive micro-printer for ASTM D93 and IEC60296-compliant reporting for industrial and research use. #LabEquipment #PetroleumTestingEquipment #Fison https://www.fison.com/flash-point-tester/fm-fpt-a100

Equilibrium Closed Cup Flash Point Tester LB-30CFP - Flash Point Analyzer Labotronics Equilibrium Closed Cup Flash Point Tester determines flash point of petroleum products, fuels, solvents, and chemical liquids using the equilibrium closed-cup method for compliance and safety testing workflows. Its controlled heating system and automatic ignition detection maintain test consistency and reduce manual intervention across flash point determination, product classification, and regulatory compliance testing cycles. Manufactured for petroleum, chemical, and lubricant laboratories, this flash point analyzer supports ASTM and CE-compliant reporting workflows for storage evaluation, transportation safety, and industrial regulatory testing environments. https://www.labotronics.com/equilibrium-closed-cup-flash-point-tester/lb-30cfp #LaboratoryEquipment #PetroleumTestingEquipment #Labortonics

Conductivity and TDS Analysis Meter Labmate Benchtop Conductivity Meter is used for measuring electrical conductivity in aqueous samples to support routine water and solution analysis in laboratory workflows. Functioning as a benchtop TDS meter, it determines total dissolved solids and ionic concentration to assist quality control, process monitoring, and analytical verification. The instrument supports chemical, environmental, pharmaceutical, and research laboratories requiring consistent conductivity and TDS measurement under controlled conditions. #WaterTestingEquipment #ConductivityMeasurement #LaboratoryEquipment #Labmate https://www.labmate.com/benchtop-conductivity-meter

Precision Testing for Conductivity, TDS & Temperature Labmate Benchtop Conductivity Meter is used for measuring electrical conductivity and TDS in liquid samples to support routine water analysis in laboratory workflows. -30 ℃ Low Temperature Freezer provides controlled low-temperature storage for biological samples and reagents requiring stability in laboratory and clinical environments. Rectal Thermometer is used for accurate internal body temperature measurement in veterinary and clinical settings for routine monitoring and assessment. #WaterTestingEquipment #Freezer #Thermometer https://www.labmate.com/benchtop-conductivity-meter https://www.labmate.com/30c-low-temperature-freezer https://www.labmate.com/rectal-thermometer

Tablet Friability Tester FM-TFT-A100 - friability test tablet fison Tablet Friability Tester performs dual-drum friability and abrasion testing at 20 to 90 rpm across pharmaceutical, food, animal feed, and pesticide tablet formulations. Its 286 mm inner cylinder diameter, 156 mm tablet drop height, and ±1 rpm speed accuracy maintain consistent tumbling force, reproducible drop conditions, and precise rotation control across every test cycle. Automated sample discharge and MPU-controlled auto-testing reduce manual handling steps and operator-dependent errors across single and dual-drum friability runs. Manufactured for pharmaceutical and industrial quality-control laboratories, the dual-cylinder tablet friability tester supports benchtop integration via LED preset and real-time value display with auto-diagnose and auto-alarm functionality, and USP/EP-aligned drum geometry for research and production-line use. #LabEquipment #PharmaceuticalTestingEquipment #Fison https://www.fison.com/tablet-friability-tester/fm-tft-a100

Low Speed Centrifuge LLS-A56 - Digital Centrifuge Labtron Low Speed Centrifuge LLS-A56 operates at speeds up to 4000 rpm with a maximum RCF of 1880 x g and an 8 x 20 ml capacity. The microcomputer control system and digital display support sample separation and specimen processing in clinical, biochemical, and research laboratories. A brushless motor with programmable acceleration and deceleration profiles supports controlled centrifugation. Overspeed protection, imbalance detection, and an electric lid lock support laboratory safety requirements #LabEquipment #WaterTestingEquipment #Labtron https://www.labtron.com/low-speed-centrifuge/lls-a56

Multi Module Vortex Mixer FM-MMV-A100 - Multi Sample Tube Mixer Fison Multi Module Vortex Mixer FM-MMV-A100 performs simultaneous multi-sample vortex mixing across a 200 to 3000 rpm speed range with stepless speed control and a 4.5 mm circumferential diameter for laboratory sample preparation. Its DC brushless motor, anti-slip base pads, LCD speed display, and continuous or inching operation modes support stable, repeatable sample processing with reduced manual intervention. Manufactured for research, clinical, diagnostic, and pharmaceutical laboratories requiring simultaneous multi-tube vortex mixing and high-throughput sample preparation workflows. https://www.fison.com/multi-module-vortex-mixer/fm-mmc-a100 #LabEquipment #PetroleumTestingEquipment #Fison

Benchtop Multi-parameter Water Quality Meter FM-BMW-A100 - Water Quality Meter Fison Benchtop Multi-parameter Water Quality Meter FM-BMW-A100 measures pH, ORP, conductivity, dissolved oxygen, TDS, salinity, resistivity, ion concentration, and temperature. It offers a pH range of -2.000 to 20.000 and dissolved oxygen measurement up to 20.00 mg/L. Its multi-point calibration, Auto-Read function, USB interface, 500-data memory, and automatic temperature compensation support traceable testing workflows with reduced manual input. Manufactured for environmental, wastewater, agricultural, pharmaceutical, and research laboratories requiring documented multi-parameter water analysis and data management. https://www.fison.com/benchtop-multiparameter-water-quality-meter/fm-bmw-a100 #LabEquipment #WaterTestingEquipment #Fison

Portable Turbidity Meter LTM-A10 - Digital Turbidity Meter Labtron Portable Turbidimeter measures turbidity in water samples using the nephelometric (90° scattered light) principle per ISO 7027, with results reported in NTU on a backlit LCD. The microprocessor-controlled instrument stores up to 20 data sets and incorporates automatic power-off for field and laboratory operation. Applications include drinking water analysis, wastewater monitoring, environmental compliance testing, and industrial process control. #LabEquipment #WaterTestingEquipment #Labtron https://www.labtron.com/turbidity-meter/ltm-a10

Portable Turbidity Meter LTM-A16 - Handheld Turbidity Meter Labtron Portable Turbidity Meter measures turbidity in water samples using the nephelometric (90° scattered light) principle with an infrared LED source. Measurement output is reported in NTU. The instrument operates across laboratory and field environments, with a backlit LCD, onboard storage for up to 20 data sets, and automatic power-off. Applications include drinking water analysis, wastewater monitoring, environmental compliance testing, and industrial process control. #LabEquipment #WaterTestingEquipment #Labtron https://www.labtron.com/turbidity-meter/ltm-a16

TSS Meter LTSS-A10 - Portable TSS Meter Labtron TSS Meter measures from 0.01 mg/L up to 120,000 mg/L under pressures up to 0.4 MPa. Infrared absorption and scattered light technology support stable suspended solids analysis. Double-scattering method minimizes interference from water colour during measurement #LabEquipment #WaterTestingEquipment #Labtron https://www.labtron.com/total-suspended-solids-meter-tss/ltss-a10